Modifiers and substitutes let one program fit different athletes. A modifier changes sets for athletes who meet a condition: a group, one athlete, or a metric value. A substitute is the exercise an injured athlete gets in place of one their injury rules out. This article covers where modifiers live, writing one, the modifier library, how they reach plans, checking what an athlete gets, injury swaps, and what to check when a modifier doesn't apply.
Modifiers
A modifier reads as one sentence, such as "If athlete is in Speed Development: change Back Squat — reps by −1, weight by −10%." FYTT checks it for each athlete when they start a workout and changes only that athlete's sets. Nothing changes in the builder.
Where modifiers live
Every Modifiers section works the same way, with Add from library (1) and Add modifier (2) in its heading. Where you put the rule decides what it reaches:
Block: only that block's sets. Open the block and scroll to Modifiers. See Blocks.
Program: every block in the program. Click Edit at the top of the program. See Programs.
Progression: every block in the progression. Click Edit in the progression's header. See Progressions.
A block lists the program and progression rules it inherits under its own, marked applies before this block's own · read-only here, with a link to Edit in program settings or Edit in progression settings. While a section has no modifiers at all, Add modifier sits in the middle of the empty section instead of the heading. An athlete's adjusted copy of a block has no Modifiers section.
Writing a modifier
To give one group lighter loads, for example:
Open the program's panel with Edit and click Add modifier (2 above).
Under If, click A group and pick the group.
Under Then, pick the exercise beside Change: one exercise, or All exercises (All exercises in this block on a block).
Click Weight, choose Change by %, and enter −10.
Click Save modifier. Nothing applies until you save.
Each condition (1) is one of:
A metric: the athlete's value for a metric compared with A value of or Another metric. It uses the athlete's latest value on or before the workout date. An athlete with no value yet counts as 0.
A group: the athlete is, or is not, in the group.
One athlete: the athlete is, or is not, that person.
Click a condition to open it and Done to close it. A condition with no metric, group or athlete picked stays open and says what's missing. The trash icon beside a condition removes it. With two or more conditions, choose All of these or Any of these beside Apply when.
What a modifier changes
Under Then, Change (2) picks the exercise the rule applies to. Each change is one row (3):
Swap exercise replaces the exercise, for example Swap to Hip Thrust for one athlete who can't deadlift. Your library's exercises are suggested as you type; to swap to one that isn't in your library, type its name and pick Use with that name. It isn't added to your library.
Reps, Weight, Rest, Time, Distance, and the measures under Speed, power, more can be Set to a value, changed by an amount (Change by), or changed by a percent (Change by %).
Custom replaces the set's custom text.
On a block, Example set shows one of its sets before and after the change. A saved modifier saves each field as you change it; the badge reads Saved, or Won't apply yet when the rule has no condition, no change, or points at something deleted.
When two rules can hit the same sets, the row says so ("Stacks with 2 program modifiers on all exercises") and both apply. Rules apply in order: the program's first, then the progression's, then the block's own by number. Each rule matches the exercise as written, so a rule on Deadlift still applies after another rule swapped Deadlift out. When two swaps both apply, the later one wins, and the earlier rule's row says so ("If #2 also applies, its swap replaces this one"). For "below 3, swap to KB Deadlift; below 1, swap to Hack Squat", put the below-3 rule first.
To reorder a section's own rules, drag one by its handle, or choose Grab to reorder from its ⋯ menu and move it with the arrow keys (Enter drops it, Esc puts it back). The numbers update as it moves and the order saves when you drop it; a new or duplicated rule goes at the end. Rules a block inherits are reordered in their program or progression settings. Plan and athlete copies that stay in sync with the program pick up the new order.
The modifier library
Keep the rules you write again and again, such as an injury swap or a deload, under Library › Modifiers (1). Each row shows the rule's name, its sentence, where it's saved, and Used on: how many blocks, programs and progressions carry a copy. For library locations and the other tabs, see Training library.
A modifier saved to a team's library can name that team's groups and athletes. One saved to the institution or your personal library can only check a metric, because groups and athletes belong to one team. Without a condition it reads as plain English, such as "Change Bench Press — exercise to External Rotation Iso.", and whoever adds it chooses who it applies to.
Creating and editing library modifiers
Click New Modifier (2 above) › From scratch, or With Flex to describe the rule instead (see Flex).
Under Create content for (1), choose the library it's saved to.
Enter a Name.
Write the rule under If and Then as you would on a block. Saved outside a team, A metric (2) is the only condition on offer.
Click Create modifier (3).
Click a row to open it, then click Save changes. To delete, tick rows and click Delete, or click Delete in the panel. Editing or deleting a library modifier doesn't change the copies already added to blocks, programs and progressions.
Below the table, Suggested lists up to five rules your team has written on three or more of its programs and hasn't saved yet, with how many programs carry each. Click Save to library (1) to open one in the New modifier panel, check its name and location, and click Create modifier. New repeats can take a few hours to show up.
Only coaches who can edit the library see New Modifier, Suggested and Delete.
Adding one from the library
In any Modifiers section (block, program or progression), click Add from library (1). The picker opens right under it.
It lists up to eight library modifiers: first those whose exercise is in the block, program or progression, marked Fits: and the exercise (3), then All exercises rules, then the rest. Type in Search library modifiers (2) to search names and exercises as you type.
Click Add (4). The copy opens in place. If it has no conditions yet, its badge reads Won't apply yet until you add one.
The copy is an ordinary modifier: edit it freely. Its row says From library: and the name it had when you added it. A rule this section already has reads Added in the list.
Saving a modifier to the library
Open a modifier row's ⋯ menu and click Save to library. The form opens at the foot of the section. This is not the Save to library at the top of a block, which saves the whole block.
Check the Name (1). It starts as the swap or change the rule makes, such as "All exercises: rest by +0:30".
Choose the library under Create content for (2).
Click Save to library.
The modifier itself doesn't change. Saved anywhere but the team its groups and athletes belong to, those conditions stay behind and the form says how many. Save to library isn't offered on a rule with no exercise or no change yet, or on a rule you added from the library.
Modifiers in plans
Adding a library program to a plan gives the plan its own copy, modifiers included (see Plans). The copy's modifiers are the ones its athletes get. To change a rule for a plan, open the program inside the plan and edit it there.
Edits to the library program reach the copy only when Keep plans in sync is on in the library program's Enrollments section. With it off, a rule you add to or change on the library program, its blocks or its progressions stays in the library; plan copies already made keep their own. With it on, every modifier travels: the blocks' own, the program's, and each progression's (to the copy's progression of the same name). Saving a rule in the library program replaces the rules in every plan copy whose enrollment is still running, including rules added in the plan. See Programs.
Checking what an athlete gets
Open the program's Detailed View and choose an athlete from Preview for athlete (1). Every set shows as that athlete gets it, with modifiers and injury swaps applied (2, 3). Nothing is saved.
Athletes see only the result: the changed sets in their workout, with no mention of the rule. In the training report, a set a modifier changed is marked Modifier and a set swapped for an injury is marked Injury swap.
To change one workout for one athlete, rather than write a rule, use Make adjustments on the workout (see Blocks).
Injury swaps
An injury swap needs no rule. While an athlete has an active injury (see Injuries for recording one), FYTT checks each exercise in their workouts against its injury settings.
Setting up substitutes
Open the exercise in the Library and expand When an athlete is injured (see Exercises):
Ruled out by an injury to: the body parts where a current injury rules the exercise out.
Can be done one side at a time: for single-arm or single-leg work, so a one-sided injury moves the athlete to the uninjured side instead.
Substitutes: exercises in the order FYTT tries them (1).
When a swap happens
If the injury rules the exercise out, FYTT gives the athlete the first substitute their injury doesn't also rule out. If none qualifies, or the exercise has no substitutes, the athlete gets the exercise as written. When the injury gets a rehabilitation date, the swaps stop.
Every body part is checked on a new exercise
Any injury rules a new exercise out until you uncheck the parts that shouldn't. With substitutes listed, that swaps it for every injured athlete, whatever the injury.
Load rules, which turn a percentage into a weight for each athlete, are also set on the exercise. See Exercises.
Why a modifier didn't apply
The athlete had already started the workout. Rules are checked when an athlete starts it; later edits reach only athletes who haven't.
The exercise doesn't match. A rule for Back Squat doesn't touch "BB Back Squat". Pick the exercise from the list, or use All exercises.
The set was swapped first. Injury swaps happen before modifiers, so a rule for an exercise an injury swapped out no longer finds it.
The rule says Won't apply yet. It has no condition or no change, or a metric, group, athlete, or exercise it reads was deleted. A copy added from an institution or personal library modifier starts with no condition. Open it and fix or delete it.
The metric value isn't what you expect. A metric condition uses the latest value on or before the workout date, and a missing value counts as 0.
You edited the library program or the library modifier. Unless Keep plans in sync is on, the plan's copy keeps its own modifiers; edit them in the plan (see above). Editing a library modifier never changes copies already added.
Any vs. all. With All of these, every condition has to hold.








